iQ Pet no bark, Руководство пользователя

Страница: 5 / 8

- 4 -
the highest level.
- When the iQ No Bark collar is first activated by the dog’s bark, the
unit will give a warning non-stimulating vibration. If the dog continues
to bark, the unit will give a non-stimulating vibration followed by a
correction at the level it is set on.
* The iQ No Bark Collar has a preset delay of 15 seconds in-between
corrections. Once the unit activates, it WILL NOT activate again until
15 seconds has gone by (The unit will reset to the warning non-
stimulating vibration after 17 seconds of a correction if the dog does not
bark.).
TESTING THE IQ NO BARK COLLAR
- Turn the On/Off and Intensity Dial to (T), for the test mode. The LED
indicator will flash once, and after 2 seconds it will continue flashing
every 2 seconds.
- Activate the collar by making sounds directly into the mic. The unit
should now vibrate twice. After waiting 15 seconds, repeat the test once
more to verify that it is fully functional.
* When on the test mode, the sensor may be sensitive enough that it may
activate easily by a quiet sound or tap.
ATTACHING THE COLLAR STRAP
* For video instructions on how to attach the collar strap, please visit
www.iqpet.com.
Pull the strap around the body
of the iQ No Bark Collar in the
direction shown.
Hold strap here Hold strap here
With the On/Off
Intensity Dial going in
first, insert the body of
the iQ No Bark Collar
into the collar strap.
Pull the collar strap
from the opposite
side of the On/Off
Intensity Dial over
the rest of the body.
Be sure that the collar
strap is wrapped
f ully around the
body of the iQ No
Bark Collar.
1. 2. 3.