9
9
Recording audio message
1. Press the SET/REC button for 3 seconds, and you will hear a single beep. After the beep, start recording your
message by talking into the microphone (see fig. 9). Push the button again to stop recording, and you will hear a
series of 2 beeps, meaning the recording is finished. If you do not push the button again after you have recorded the
message, the recording will stop automatically after 10 seconds.
2. Nightwatcher NW760 can hold 2 self-recorded messages. If you have recorded one message, repeat above step for
message 2.
3. If you hear a series of 3 beeps when you want to record your message by pressing the SET/REC button for 3
seconds, this means the self-recorded messages are full, please erase previous messages.
□
Play/Erase: allows you to listen to and erase messages
1. If you have only recorded 1 message, push the button one time to listen to recorded Message 1. If you wish to
erase it, press the PLAY/ERASE button and hold it for 3 seconds. You will hear a series of 2 beeps, indicating the
message has been erased.
2. If you have recorded 2 messages, push the button one time to listen to the first message, and push it again to
listen to the second message. If you want to erase a message, select that message, and after listening to it, push the
PLAY/ERASE button and hold it for 3 seconds to erase it.
3. If message 1 is erased, message 2 will automatically become message 1. The next message you record will then
become the new message 2.
SD Card Installation:
To insert and remove the SD card for onboard recording use Allen Key H.
The SD card can be
inserted prior to the installation and device being powered or mode 4 can be activated to stop the
LED head from turning to insert the SD card.
