IQCCTV
IQ1920DVR User Manual
20
Picture 5-4
Click the [Live] button to pop up the interface as shown in Picture 5-5. This allows the user to
perform a channel sequence setting.
Similarly, Click the [Spot output] option and set relative parameters.
5.3.1.3 Privacy Zone
This function allows the user to setup privacy zone parameters, as show in the image below.
Each channel can have up to four privacy zones. Follow below steps to set:
1. Select the area no (Area 1 ~ Area 4)
2. Click [Setup] to adjust position of mask area
3. After finishing position adjust, click right key of mouse to return back [Privacy zone] interface
4. Click [Apply] to save the above setting.
Picture 5-10
Picture 5-5
Picture 5-4
