IQCCTV IQR16D
– 16 Camera DVR
12
2.5 Alarm setup
2.5.1 Alarm port connection figure
The alarm terminal input block, loacted at the back of the DVR (shown below):
Alarm In:
Alarm Channel:
Choose the alarm channel
Sensor Type:
Depending on your alarm you can select either ‘Normal Open’ or
‘Normal Close’.
Record:
Setup which channel to record to if an alarm ia activated.
Alarm Out:
Select the alarm output channel on the back panel.
Buzzer:
Control the Buzzer settings if an alarm is activated .
Action PTZ:
When an alarm is activated, the DVR can quickly move a PTZ camera
moving to preset position. You must set up the preset position within the PTZ setup
menu before this can work.
Disp-Video:
Setup the video pop-up channel, which is displayed on the main screen if
an alarm is activated.
Event Duration:
Setup the alarm duration time.