- 15 -
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP
address of your computer. When you connect the camera to your
computer directly to proceed with configuration of the camera, you
need to set up the IP addresses to be in the same segment for the
two devices to communicate.
1.
On your computer, click
Start > Control Panel
to open the
Control Panel window.
2.
Double-click
Network Connection
to open the Network
Connection window.
3.
Right-click
Local Area Connection
and then click
Properties
from the shortcut menu.
4.
When the Local Area Connection Properties window appears,
select the
General
tab.
5.
Select
Internet Protocol [TCP/IP]
and then click
Properties
to
bring up the Internet Protocol [TCP/IP] Properties window.
6.
To configure a fixed IP address that is within the segment of the
camera, select the
Use the following IP address
option. Then,
enter an IP address into the empty field. The suggested IP
address is
192.168.0.x
(
x
is 0~254 except 30), and the
suggested Subnet mask is
255.255.255.0
.
7.
When you are finished, click
OK
.
