Product Description of BRT-606
Page 2 of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 1, the wall mount unit of BRT-606 timer switch has an LCD display and two
On/Off buttons in the front. The LCD display shows the current time and the current status of the
switch. The On/Off buttons are used for turning on or turning off two loads, respectively.
For each On/Off button, when the On/Off button is pressed,
The display shows On and the load will be turned on immediately; and
When the On/Off button is presses again, the display will show Off, and
If there is no delay-off time being set, the load will be turned off immediately; or
If there is delay-off time being set, the load will be turned off only after the preset delay off
time runs out. Meanwhile, the display will show a “bell” sign. Press the On/Off button will
cancel the delay off operation and turn off the load immediately.
Fig.3
Hidden 9 Keypad Panel
As shown in Fig. 3, the front plate can be flipped down from the top edge. A 9 keypad panel
hidden behind the front plate is used for setting up the timer. Please refer to
“
BRT-606 Timer
Switch Setup” for details.
Fig.4
Remote Control Set
