43
7
To delete eproms
General
An eprom first has to be deleted before you can program it again.
To delete
❺
Take an eprom
Remove the sticker from the round opening.
❺
Put the eprom with the opening upwards in the box with UV-light.
❺
Close the box and light the luminous source.
Repeat this action several times (2-3) to be sure that the eproms are deleted.
Remark :
An eprom which is not completely deleted, will give the following notice at the programmation :
‘Blank error at xxxxx’ where ‘xxxxx’ is the part of the eprom that has not been deleted yet.
Howéver, when you have deleted the eprom 3 times, and ‘Blank error’ still appears on the
display, this means that the eprom is out of order.
The manufacturer keeps the right at any time to change the contents
of this manual, without prior notice.
