FXO2
User Guide ver. 1.1
Autotranslation, no pics
2 SIP, 2xRJ45, 4xRJ11
Pre-version userguide
page 13 of 13
© IPshop ApS 2009
I:\FAQ\FXO2\userguide\FXO2_UG_EN.doc Ver. 1.1
WARNING! When the terminal is updating, never power down the FXO2. It will
destroy the equipment.
3.10.2 Change Password
A
）
User Password (default:1234)
User password is for the user of “user”. “user” is the lower level user of the
configuration, when “user” login, “Call setting” will not show. It means “user” only can
setup something like network etc.
B
）
Administrator Password (default: admin)
Administrator Password
is the password of “admin”. ”admin” can change anything of
FXO2 so please reminded change the password of “admin” after you finish configure
the device.
3.10.3 Reset Configuration
When reset configuration is click FXO2 will reset to factory default.
After reset all the configured will be lost
.
3.10.4 Reboot the Device
Click on this field to reboot the device.
4 Products Parameter
Characteristics of the hardware Parameter Remarks
Processor ARM9E 133MHz
DSP VDS924PM4 200MHz
RAM 16M
FLASH 4M
Power DC12V/500mA +-10%
Consumption The maximum 3 W
Impedance 600 ohm
Ring Detect Range 30-150Vrms 18Hz-55Hz
PSTN Port Voltage Upper Limit 160V
LED Operate, network , circuit
Network card 2 100/10BASE-T
Weight
230 grams
WHITOUT DC ADAPTER
Working temperature 0
－
42
℃
Working humidity 40
％－
90
％
not congealed
Colour White
PSTN Ports 2
VoIP Chunnel 2
5
Manufactory Parameter
Parameter
Default
LAN DHCP
Network
PC Static IP:192.168.8.1
admin admin
Password
user 1234
Time Zone GMT
＋
8
This default parameter are unsuitability the customization’s products.
