3PH ON-GRID solar inverter
9
www.ips-ups.eu
IPSPV33-ONGI-manual_ENG-R0
7.10.2020
5
AC output terminal
1 set
6
Communication module (Wi-Fi)
1 set
7
Expansion screws
3 sets
8
Hexagon socket screws with spring and plain washer
1 pcs
9
Outer hex-cross screw with spring and plain washer
1 pcs
10
Wall mounting bracket
1 pcs
11
Waterproof terminal
2 set
3.2 Storage
If the inverter is not immediately put into operation, it needs to be stored in a specific
environment:
The inverter needs to be repackaged with the original packaging and the desiccant is
retained. The packaging box needs to be sealed with tape.
The inverter should be stored in a clean and dry place that free from dust and water
vapor erosion.
The temperature of the storage place should be kept at -
30°C - +85°C and the
relative humidity should be maintained between 0 and 100% without condensation.
If the inverter should be stacked, it is recommended that the maximum number of
layers can be accumulated no more than 5 layers.
The inverter must avoid the corrosive chemicals, otherwise it may be corroded.
It needs regular inspection during the storage, and the packaging materials should
be replaced timely in the case of damage by rats and vermin.
Do not tilt or invert the packaging box.
After long-
term storage, the inverter can’t be put into operation until the
comprehensive inspection and testing is made by qualified personnel.
