IPRO i7320, Руководство пользователя

Страница: 9 / 28

9
flashes, it means that the charge has been completed. This process usually takes 3 to 4 hours.
During charging, batteries, cell phone and charger may become hot, which is normal.
After charging, disconnect the AC power outlet with phone and charger.
Note:
——
It must be placed in tempe50C
～
+400C for ventilation while charging and be sure to use
the charger provided by the manufacturer. Using an unapproved charger may be dangerous and it
violate the recognition of the mobile phone and warranty.
——
When the phone is automatically shut down or show low battery warning "battery low", it is
timely to charge the battery. If you do not run out it before charging the battery, the phone will
automatically reduce the charging time.
——
The standby and talk time provide by Mobile phone manufacturers are based on the ideal
working environment. In actual use, the battery working time may be changed as the network status,
work environment and the way of use.
——
After charging, please disconnect the charger with the phone and power.
If you do not have the charger with power and phone off, then after a fairly long time (about 5-8
hours), battery power consumption to a certain extent, the phone began to charge again. We suggest
that you do not do it like this, because it will have some impact on your battery performance and life.
2.4 Power
To turn on the phone, please press the peak key
。
When you open the phone and insert SIM card, your phone will automatically verify whether the
SIM card is available. Then the screen will display the following order:
——
Enter the phone password (if you set the phone lock password)
Mobile decryption is decrypt; the phone will search for available networks automatically.
Once contacted, the network provider's name will appear in the upper left corner of the screen. It
means cell phone is in the normal standby mode, you can engage in normal use.
Note: If the screen says "no service" means that you hare out of the normal network coverage
(service area), but you can still send an emergency call as the signal strength.
2.5 USB data cable to use
The way of using USB data cable: one end of the USB data cable is inserted into the PC (personal
computer) on the USB port, then connect the other end to the bottom of the phone, "Charge / Data
Interface" on.
The phone supports USB, USB data cable you can connect your phone to your computer, mobile
phone and the computer to copy, move files, etc, T can also browse the photos stored on the card,
audio, video and other documents.
Note: This phone only supports the power-state data transmission.
2.6 T-flash card to install/ remove
T-flash card, which is a multimedia memory card to increase memory, is built into the fuselage of