IPRO i7320, Руководство пользователя

Страница: 14 / 28

14
The factory default password is 0000
SIM lock
You can check the SIM card lock state and modify the password here.
Auto keypad lock
You can set the item manually to lock the phone immediately and also can select automatically
lock, so that the screen and keyboard will be automatically locked when the phone enters the standby
screen and has not been used for a period of time.
Restore settings: Choose General > Restore settings to restore the factory settings. Input the
phone lock code and then select OK or press the Left soft key.
Note: The initial phone lock code is 0000.
4.4.2 Phone
Dual-SIM refers to two SIM card slots, and the two cards can standby at the same time. User can
choose one number to call and answer. Set dual sys call forward means that phonebook must set
MSISDN of two cards first and then when only one card enable, the other card will forward the call to
the enabled one.
Call settings:
Call waiting: After you choose Activate, the mobile phone will contact the network. A
moment later, the network will make a response and send a message to acknowledge your
operation. If the call waiting function is activated, the network will alert you and the mobile
phone screen will display the incoming call number if others are calling you while you are
already in a conversation.
The function enables you set the caller identity, Any key answer, Minute reminder, Auto
redial, Auto answer, Answer reminder, Cost settings, IP number and user group.
Call divert: This network function enables you to forward incoming calls to another number you
have previously specified.
Call barring: Call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator. If the
code is wrong, an error message will be prompted on the screen. After selecting a call barring
option, continue to select Activate or Deactivate. The mobile phone will prompt you to input the
call barring code and then contact the network. A moment later, the network will make a
response and send the operation results to the mobile phone.
Network settings: Set Network selection mode to Automatic or Manual. Automatic is
recommended. When Network selection mode is set to Automatic, the mobile phone will prefer
the network where the SIM card is registered. When Network selection mode is set to Manual,
you need to select the network operator's network where the SIM card is registere
。
Default SIM
You can set the default setting as SIM card 1 or SIM card 2.
Speed dial
You can set the number you want to dial fast through this function. When you have set it,
you can use the mode of number key+ dial key in the dialing interface to achieve fast dial.
4.4.3 Connection
The function you set the DATA account, WAP settings,MMS settings,JAVA settings.