IPOX N9000 Series, Руководство пользователя

Страница: 39 / 143

IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
39
•
The IP camera which directly connects to the PoE port of the NVR through private protocol
will be shown automatically in the camera list.
•
One of the two conditions must be met if the IP camera which directly connects to the PoE
port of the NVR through ONVIF protocol should be shown automatically in the camera list.
o
The IP camera which directly connects to the PoE port is in the same network
segment with the internal Ethernet port.
o
The DHCP (obtain an IP address automatically) of the IP camera which directly
connects to the PoE port is enabled.
If the IP camera which connects to the PoE port cannot be displayed automatically in the camera
list, please refer to Q6 in Appendix A FAQ for details.
4.2 Add/Edit Camera Group
4.2.1 Add Camera Group
Click “Edit Camera Group” in the above interface to go to the interface as shown below.
Click “Add Group” to pop up the window as shown below. Set the group name and dwell time (the
dwell time of the camera group sequence view) in the window. Check the cameras and then click
“Add” to add group. Click
to view the cameras in the group after adding group.