IPOX N9000 Series, Руководство пользователя

Страница: 129 / 143

IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
129
Notes:
1. Please make sure that the IP address of the NVR and the computer are both in the same local
network segment. For example, supposing that the IP address of the computer is 192.168.1.41, the
IP address of the NVR shall be set to 192.168.1.XXX.
2. If the HTTP port of the NVR is not 80, but other number instead, you need to enter the IP address
plus port number in the address bar when accessing the NVR over network. For example, the HTTP
port is 81. You should enter http://192.168.1.42:81 in the address bar.
13.3 Web WAN Access
➢
NAT Access
①
Set the network of the NVR. Please refer to 12.1.1 TCP/IP Configuration for details.
② Enable NAT and then set the NAT server address. Please refer to 12.1.7 NAT Configuration for
details.
③
Open a web browser on your computer, enter the NAT server address www.autonat.com in the
address bar and then press enter to go to the interface as shown below (download and install the
relative plugin according to the tip if you access the NVR through NAT for the first time).
Input the serial number (click on the tool bar at the bottom of the live preview interface to see
the serial number of the NVR), user name (the user name of the NVR, admin by default) and
password (the password of the NVR, 123456 by default) of the NVR, select the display language on
the top right corner of the interface and then click “Login” to go to the web client interface.
➢
PPPoE Access
① Click Start → Settings → Network → PPPoE to go to the “ PPPoE ” interface. Check “ Enable ”
in the
“
PPPoE settings
”
and then enter the username and password you get from your ISP. Click
“ Apply ” to save the settings.
②
Click Start
→
Settings
→
Network
→
Network Status to view the IP address of the NVR.
③
Open a web browser on your computer, enter the IP address of the NVR like