IPN W9 Series, Руководство по эксплуатации

Страница: 9 / 22

9
2. Setup
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
Ÿ
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
headset Base to find the correct wiring for your device.
Ÿ
Connect the power adaptor supplied with the product to the base unit.
The base power LED with light.
base with the headset port on your telephone.
Ÿ
Using the headset cord supplied with the product, connect the 'Tel' port on headset
2.2 Connecting to a telephone or terminal without a headset port
Ÿ
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible Handset Lifter (refer to your supplier)
Ÿ
Fit the handset lifter to your telephone as indicated in its user guide.
base with the 'handset' port on your telephone.
Ÿ
Connect the handset lifter to the 'AUX' port located on the back of the Headset Base.
Ÿ
Using the headset cord supplied with the product, connect the 'Tel' port on headset
Ÿ
Use the power adaptor supplied with the product to connect the headset base to a
Ÿ
You may need to adjust the wiring switch that is located on the bottom of the
Ÿ
Ensure that the EHS selection switch is set to ‘RHL’.
Ÿ
Connect the telephone handset cord to the handset port on the headset base.
power socket.