16
④After the address is written, the controller will also enter the channel test mode (same as the
channel test after manual address).
⑤After completing the channel test, press the
“
CHIP
”
button to exit the test mode, and the
controller returns to the play mode to work normally.
八、
Bluetooth control
The controller has a built-in Bluetooth receiver module that can be controlled using the mobile
APP.
1. Mobile phone installation Bluetooth debugging APP
；
2. The phone turns on the Bluetooth function, click on the APP, search for the controller, as shown in
Figure 1
；
3. Select and click the Bluetooth number of the controller to enter the control page, as shown in
Figure 2
；
图
1
图
2
图
3
①
Program selection area
：
Select the effect program in the SD card; click on the program in the drop-down
menu
；
②
Color debug area
：
Instantly adjust the luminaire to display the clicked color;
③
Speed adjustment area
：
16-speed level adjustment
；
④
Play operation area
：
Play/pause, cancel (control), loop (play), save (set) four selection options;
⑤
Other operation area
: Device management, built-in effects, channel brightness, dimming settings, DMX write
code, test DMX address, restart master, as shown in Figure 3
；
