15
4.2. Pess “
MODE
” move arrow corresponding select “
RGB,RGBW
”
。
4.3. Press “
SET
” to enter lamps channel selection interface, as show in the below figure:
① RGB
Three channel lamps
② RGBW
Four channel lamps
4.4. Press “
SPEED+
” and “
SPEED-
” to move the arrow up and down, to select the RGB/RGBW
channel selection.
4.5. Press “
MODE
” confirm the selection, the two settings as show below:
Or
4.6 Select to complete the lamp channel selection, press
“
SET
”
to exit and return to the main
interface.
5. Transmission rate selection mode
（
100-BASE 100M rate / 1000-BASE Gigabit rate
）
5.1. Press the
“
SET
”
button, and the controller will start up, enter the parameter setting and
other function interface 1.
5.2. Press the
“MODE”
button to move the arrow to select “100-BASE”.
5.3. Press
“SET”
to enter the signal transmission rate selection mode interface, as shown in the
figure:
① 100-BASE
100M rate
② 1000-BASE
Gigabit rate
5.4. Press the
“
SPEED+
”
and
“
SPEED-
”
keys to move the arrow up and down to select the
100-BASE /1000-BASE option.
5.5. Press the
“
MODE
”
button to confirm the selection, as shown in the two settings:
OR
5.6. Select to complete the transmission rate selection, press
“
SET
”
to exit and return to the
main interface.
5.7. When the controller is in regular program, it shows: GE Gigabit rate / FE 100M rate, as shown
