ipf electronic PSQ80076 Скачать руководство пользователя страница 3

Страница: 3 / 4

MANUAL

• Subject to alteration! Version: June 2022

ipf electronic gmbh

│

Rosmarter Allee 14

•

58762 Altena

• Germany

│

Tel +49 2351 9365-0 • [email protected] •

Adjustment

Align the transmitter and receiver so that the transmitter beam hits the receiver element straight on.

Switching mode

N.O. = normally open
N.C. = normally closed

Setting

The light barrier is set via teach-in on the receiver. You can teach-in via the key or by connecting the white line to L+

instead of pressing the key.

Standard teach in:

Is suitable for almost any application. The adjustment is made to the free light beam and the object.

Step 1: Teach in the light barrier.

Step 2: Teach in object.

Press the

key

> 3s

on the receiver,

Press the

key > 1s

on the receiver.

until the green and the yellow LED simultaneously

flashing. Release the key, the LEDs flash

alternately.

Содержание PSQ80076

Страница 1: ...tput current max load 50mA Output signal PNP no nc Response release time 0 125 ms Switching frequency 4kHz Transmitting element clocked Laser diode red light pulsed Light spot size see diagram Wavelen...

Страница 2: ...documentation if applicable have been observed Not a safety component according to the EU Machinery Directive The use of these products is prohibited if they have a direct impact on personal safety I...

Страница 3: ...N C normally closed Setting The light barrier is set via teach in on the receiver You can teach in via the key or by connecting the white line to L instead of pressing the key Standard teach in Is su...

Страница 4: ...ly for small objects Step 1 Step 2 Press the key 3s on the receiver On the receiver press the key for the duration until the green and the yellow LED simultaneously of a cycle flashing Release the key...