ww
w
.ip
el
ec
tr
on
ix
.c
om
IPEX
(IP Electronix)
PH485Ex1:
User’s Manual
Page 14 of 21
Doc No. : PH485Ex1-UM-001
18 May 2014
10.
Connecting to Device via TCP Socket
It is possible to directly connect to PH485Ex1 RS-485 Serial Port from any node of the network by using socket
programming. This is simply done if you know only PH485Ex1 IP Address and socket port number for each Port.
The port numbers is as follow:
-
Port 1 : 9761
-
Port 2 : 9762 (Only for PH485Ex2 Model)
For example we connect to Port 1 by means of Hyper Terminal. Run Hyperterm.exe and from properties dialog
box, select “TCP/IP (Winsock)”:
Enter device IP Address in the “Host address:” section, for example 192.168.0.2 and the port number in the
“Port Number:” section (port number for Port 1 is 9761 and for Port 2 is 9762), then click on OK.
Now if you type some characters, you can see that port 1 TX Blue LED is blinking that means the data is sent to
PH485Ex1 port 1.
NOTICE: Don’t forget to set PH485Ex1 in
SERVER Mode
for this method of connection.
