ww
w
.ip
el
ec
tr
on
ix
.c
om
IPEX
(IP Electronix)
PH485Ex1:
User’s Manual
Page 10 of 21
Doc No. : PH485Ex1-UM-001
18 May 2014
Turn on the PH485Ex1 by connecting a DC Power Supply to it. The voltage of the Power Supply should be from
+10V to +30V. For example, this device is working with a 12V, +15V or +24V DC Adaptor. If all the
connections are OK, you should see the default settings on the Hyper Terminal.
Entering Device Network and Serial Ports Setting Menu (IMPORTANT!)
Now to enter device network and serial ports settings menu, follow the below procedure step by step:
1-
Push the CONFIG button on the right side of the front panel (Do not release it).
2-
Press (and release) RESET button on the left side of the front panel.
3-
Release the CONFIG button.
You should be able to see the network settings menu like this picture: