ww
w
.ip
el
ec
tr
on
ix
.c
om
IPEX
(IP Electronix)
PH232Ex2
:
User’s Manual
Page 26 of 28
Doc No.: PH232Ex2-UM-001
14 January 2022
-
Setting Redirect by UDP Network Command
To send redirect command from a remote workstation or software to device, we need IP number or Host-Name
and the UDP port number. The default UDP port number is 9765 and you can change this port number if
necessary. We also need to know the device Remote Command Password which is a Four-Digit number that you
can see it in Network Setting and also can change it there if necessary.
