ü
Charging VZ-X
Please charge VZ-X and make sure it has sufficient battery power before using it. The
steps for charging VZ-X are as below:
1. Connect the included Micro-USB cable to the Micro-USB port of VZ-X. Next,
connect the other end of the cable to a 5V/2A USB power adapter (not included).
Then, plug the adapter to an outlet for charging.
Note:
(1) It is not possible to charge VZ-X via a USB port of a computer as it does not
provide sufficient power output for charging it.
(2) You can use VZ-X once it is plugged into a power outlet regardless of its
remaining battery power.
2. When VZ-X is charging, the Battery Status Indicators will light up green indicating
that VZ-X is receiving a charge. Do note that there are a total of five indicator lights:
the more indicators light up, the more battery charging is. All of the indicator lights
will light up when VZ-X is fully charged.
Note:
(1) VZ-X’s battery can last for at least 9 hours on a full charge.
(2) It takes approximately 9 hours to fully recharge VZ-X on an empty battery
assuming that it is powered off while recharging. It will take significantly
longer to fully recharge if it is in use.
