iPECS iPECS 7016D, Руководство пользователя

Страница: 10 / 49

iPECS
7016D & 7024D Phone
User Operation Guide
7
3.
Receiving calls
3.1 Answering a call while idle
There are 3 basic types of incoming calls; internal/external ringing
calls,
Intercom Voice Announce
calls, and
Hold
recalls.
Your phone may be assigned
Ringing Line Preference
; calls that ring
are answered by lifting the handset. Otherwise, you must press the
flashing Flex button.
External calls are from CO lines or VoIP channels that are
programmed to ring at your phone. For external calls,
Delay Ring
may
be assigned allowing others to answer the call before the call rings at
your phone.
External calls to an iPECS Phone will appear under the CO/IP line
button or a
LOOP
button
You might receive calls forwarded in some manner from another user.
If you provide call coverage for other users, you may also receive
Station Call Coverage
calls.
Calls you place on
Hold
, including Transfers, parked calls, etc. will
recall if left on hold for too long.
ICM Voice Announce
calls, which are only available to the iPECS
Phone, are answered based on the
ICM Signaling mode
at the
receiving phone; in HF (Hands-free) mode, after splash tone and
announcement, speak normally into the microphone. In the PV
(Privacy) mode, lift the handset to respond. You can assign the
ICM
Signaling mode
in
Station Programming
.
The LCD will display the calling number or, if available, the name for
the station or CO/VoIP line,
CO Line Name Display
.
OPERATION
To answer a call ringing at your phone;
• Lift the handset and, if required, press the flashing Flex button, the call
is connected.
To respond to an Intercom Voice Announce call;
• In
HF
mode signaling, simply speak as normal into the microphone
or,
• In
P
rivacy
M
ode signaling, lift the handset to respond.