Step By Step Installation
4
0.
4 i
n
2.
Connecting the iPdomo Thermostat
Place the iPdomo Wall Mounting Plate in the same position of the old
thermostat, and connect the 2 wires that come from the boiler to terminals 6-7.
If you need it, look at your boiler manual for connection details.
For 3-wire cases, connect the Live and Switched Live to terminals 6 and 7. The Neutral wire
needs to be re-connected on your old programmer, in case of still using it.
3.
Reconnecting the existing thermostat (optional)
If you want to use on occasion your old thermostat, place it close to the iPdomo.
Use the supplied 2-wire cable for connecting your existing thermostat to 4-5
terminals of the iPdomo mounting plate. Then fix and mount the existing
thermostat on its mounting plate.
Leave some free space to the left of the iPdomo Thermostat to insert the USB Pen Drive later.
For 3-wire cases, connect the Live and Switched Live wires from your old thermostat to
terminals 4 and 5. The Neutral from boiler needs to be re-connected on your old thermostat.
B
Internal diagram:
Boiler
Thermostat
To pass the cable
through the surface,
break the tab on the
bottom edge.
Internal diagram:
Thermostat Boiler
