ipDatatel Gateway 3.0 Rev 1
5
3.
HAN LED
(Home Area Network)
– Shows there is activity
between the Gateway 3.0 and other Z-Wave Devices.
4.
DIAG LED
– Indicates whether or not the Z-Wave Network is
Open or Closed.
a.
Solid LED
– Z-Wave Network is Open.
b.
LED Off
– Z-Wave Network is Closed.
5.
Power Transformer
– Female connection for included Power
Supply (12vDC).
6.
Power Terminals
– Additional connections for power, if desired.
(12vDC)
7.
RJ-45 Jack
– Ethernet connection used for customer’s
internet.Installation
Gateway 3.0 Installation (Z-Wave)
Installation of Z-Wave devices requires you to be connected to
SecureSmart on either Android or iPhone. Your device must be
registered and online before you can pair Z-Wave devices to the
Gateway 3.0. The process between Android and iPhone may vary.
This process only needs to be done once. When getting Home
Automation on a second phone you will only need to do Zwave
Discover.
Installation via SecureSmart
– Android
1.
Open SecureSmart and log into the account the Gateway 3.0 is
registered to.
2.
Select the Home Automation Icon.
3.
Select the ‘Information’ Icon at the bottom left of the screen.
4.
When adding a Z-
Wave device select ‘Zwave Add’
5.
Within 5 seconds press the Pair/Mate button on your Z-Wave
device.
a. You should see a screen on the bottom of
SecureSmart
informing you a “Node” was added.
6.
Select the back button, you will then have access to all your
ZWave devices!
Installation via SecureSmart
– iPhone
1.
Open SecureSmart and log into the account the Gateway 3.0 is
registered to.
2.
Select the Home Automation Icon.
3.
Select Z-Wave Discover and it will populate your Gateway as a
Z-Wave device.
