background image

18 

Warranty Policy 

 

 

Limited Warranty 

IPC Eagle warrants new cleaning equipment against defects in material and         
workmanship under normal use and service to the original purchaser as detailed      
below

 

3 years 

Subject to the conditions stated below, IPC Eagle warrants all Polyethylene Tanks  to 
be free from defects in materials and workmanship for a 3-year period.  Parts replaced 
or repaired are warranted for the remainder of the original warranty period. 

 

1 year 

Subject to the conditions stated below, IPC Eagle warrants all other cleaning       
equipment components to be free from defects in materials and workmanship for a 1-
year period.  Parts replaced or repaired are warranted for the remainder of the original 
warranty period.  

 

IPC Eagle will furnish and charge for replacement parts, including transportation, to 
the original owner through an IPC Eagle authorized service center. If the part is       
returned within 30 days and is found defective, the owner will be credited for the cost 
of the replacement part including shipping and handling. 
 
Labor charges are covered for one year from the date of purchase if provided by an 
authorized IPC Eagle service center.   
 
Wear items exempt from warranty include belts, carbon brushes, power cords, wheels, 
brushes, pads, handle grips, filters, screens, hoses, and squeegees. 
 
This warranty shall not apply to failures caused by misuse or abuse, improper       
maintenance as stated in the operation manuals, use of unauthorized repair parts,   
repairs by other than an IPC Eagle authorized service center, and damage in transit. 
 
IPC Eagle disclaims and denies any liability for any direct, indirect, special incidental 
or consequential damage which may be suffered as a result of sale, delivery,           
servicing, use, loss of any product, downtime, labor, freight, or other charges not     
expressly included herein.

 

Содержание 415DS





















Отзывы: