IP Solutions HLZ-61KDS, Руководство пользователя

Страница: 50 / 97

44
IP address. Please check what event needs to be detected. The Trap Address
must be under the same LAN with the IP camera.
Cold Start : The camera starts up or reboots.
Setting Changed : The SNMP setting is changed.
Network Disconnected : The network connection breaks down. (Trap messages will
be sent after the network recovers connection)
V3 Authentication Failed : A SNMPv3 user account tries to get authentication but
failed. (Due to incorrect password or community)
SD Insert / Remove : A Micro SD card is inserted or removed. Open the MIB Browser.
Use SNMPv1 or SNMPv2 to access the camera. When the SNMP setting is edited,
Manager’s MIB Browser (192.168.40.159) will receive the trap message of “setting
change” from IP Camera (192.168.40.21). Example as below:
Access List
Enable IP address filter to allow/reject some IP address a network access.
There are two options: single and range . Check the Enable ip address filter ,
enter the IP address you want to deny access.
Input the IP address you would like to deny entry, select "
deny " and click the
" Add " icon to add this IP address to the rejection list, the user with that IP
address connecting to the camera will be blocked.