GW0220
Userguide 2.0 UK
46
7 Telnet configuration
7.1 Config Procedure
Input command “cmd” on Run submenu under
PC START menu, and then key in “telnet phone-IP-address
enables users to config IP phone thru telnet.
Input username and password, both default
username and password of Administrator account are “admin”
Config IP Phone through command lines
Note:
1.
We suggest users to config IP Phone thru web browser instead of keypad or
telnet.
2.
After any change of configuration, please remember to make “write”
command to save changes and then input “reload” command to reboot IP
phone to take effect.
7.2 Telnet basic Introduction
7.2.1 Basic structure
User may use telnet command to access and manage gateway.
GW0220 adopts tree structure for telnet. Every node contains its sub-nodes or
local command. User can type “help” or “?” whenever to see sub-nodes and all
local command under current node.
Besides local command, there are some global commands can be used in each
node.
7.2.2 Basic command
