GW0220
Userguide 2.0 UK
24
#1966 , sever receive #1966
Fixed Length: When the length of the dialing match, the call will be sent.
Timeout:
Specify the timeout of the last dial digit. The call will be sent after
timeout
End with “#” , Fixed length , Time out these three option are not repulsion
4.7.7.2 User define flexible Digital map table
Digit map is a set of rules to determine when the user has finished dialing. Digital
Map is based on some rules to judge when user end their dialing and send the
number to the server.With digital map, users don’t have to press
‘
#’ key or
"call"key after dialing. If the number dialed matches some item in the digital map
table, or it doesn’t match with any item, this number will be sent out immediately.
It is not like using dial peer . Using digital map won’t change the number dialed,
the number sent is the same as the number dialed.
X
Represents any one number between 0 and 9.
Tn
Represents the last digit timeout. here [ n ] represents the time from 0~9
second, it is necessary. Tn must be the last two digit in the entry. If Tn is not
included in the entry, we use T0 as default, it means system will sent the
number immediately if the number matches the entry.
.
(Dot) represents any number and no length limit.
[ ]
Number location value range . It can be a number range(such as [1-4]), or
number is separated by comma such as [1,3,5],, or use a list such as [234]
Example:
[1-8]xxx
Any 4 digits number between 1000 and 8999 sending out immediately
9xxxxxxx
any 8 digits number starting with 9 sending out immediately
911
after finishing dialing 911 ,it will send out immediately
99T4
after finishing dial 911, it will send out in 4 second
9911x.T4
any more than 5 digits length starting with 9911, sending out in 4
second .
Using digital map can be combined with dial peer . First digital map will
