IP Power 9820 MT Series, Руководство пользователя, Страница: 56 / 60

- 56 -
5.Other ways to control
Besides webpahe control ,there are several ways to control the outlets : by HTTPS/CGI
command or by Telnet . 9820 MT also support SNMP ( MIB) , Mudbus /TCP and BACnet /TCP .
Please check page #41 to check and enable the function .
5.1 CGI HTTP Commands
CGI Commands allow you to easily integrate the 9820 MT with other systems and programs.
Please read the instructions carefully on how to use the Http:// Commands
To use http:// Commands open up a web browser and type in the command that you would like to
use.
1. User authorization .There are 3 formats :
For example : IP address 192.168.1.18
，
Username : admin. Password : 12345678
1.1
http://admin:12345678@192.168.1.18/set.cmd?cmd=getpower
1.2 http://192.168.1.18/set.cmd?user=admin+pass=1cmd=getpower
The above 2 way also for HTTPS
2. Command
set.cmd?cmd=
All command do not separate capital / lower case , the connect symbol between
commands can be
“+” ， “&” and “?”.
2.1 To get firmware version : getversion
http://192.168.1.18/set.cmd?cmd=getversion
System return : CGI Command : Data follows
Version=9258W_N_v1.0.0.1
2.2 To get MACaddress
：
getmac
http://192.168.1.18/set.cmd?cmd=getmac
System return
：
CGI Command : Data follows
mac=00929000008F
2.3 To get the status of power on/ off
：
getpower
http://192.168.1.18/set.cmd?cmd=getpower
System return
：
CGI Command : Data follows
p61=0, p62=0, p63=0, p64=0
P61 to P64 means : POWER1 to POWER4