NJR-CTB User
’s Guide
15
7 Preparations
Before using connecting the NJR-CTB, follow the precautions and instructions below.
7.1 Attaching Rubber feet
First, clean the bottom surface of the NJR-CTB as needed, and then peal the release papers from the rubber
feet and place them in each of the four corners.
7.2 Installation
Follow the instructions below when installing the NJR-CTB.
・
Do not place the NJR-CTB on another device directly.
・
Do not block vent holes. To provide adequate ventilation, maintain sufficient clearances around the
NJR-CTB (30 mm/1.18 inches or more).
・
Prepare ventilating equipment to keep the ambient temperature at 40 degrees C/104 degrees F or less. If
inadequately vented, the life of parts may be shortened and operation may be affected.
