14
REVERSING THE DOOR BUILT-IN VERSION CI140/141
The door can be EITHER LEFT OR RIGHT HINGED according to require-
ments.
CI 140 CF Model with panelled door
To change which way the door is hinged, follow these instructions:
- To remove the door, remove the screws (pictures 1-2) at the top and bottom
- Remove the screws from the upper and lower hinge;
- To reverse the door: rotate the hinges by 180°, remember that when you are
changing the position of the hinges on the door that,
the top hinge becomes the bottom
and vice versa.
- Secure the hinges in the holes provided on the opposite side;
- Secure the lock plates of the door panel into the opposite side;
Secure the door to the hinges.
CI 140 IX Model with stainless steel door - C 141 Model with glass door
To change which way the door is hinged, follow these instructions:
- Gently lay the cellar on its back;
- Remove the lower hinge by unscrewing the 2 screws;
- Lift the door to remove it from the upper hinge pin;
- Unscrew the upper hinge pin;
- Reposition the upper hinge pin in the opposite special threaded housing;
- Replace the door again;
- Position the lower hinge after rotating it by 180° and fasten it with the screws
provided
- Move the handle on to the opposite side.
All the holes needed to reverse the door are pre-drilled and cover plugs are
provided for a cleaner finish (Picture 3)
Picture 1 Picture 2
Picture 3
