IOTAVX PA 3, Инструкция по эксплуатации, Страница: 7 / 20

PA 3 Owner Manual 7
Making the Speaker Cable Connections:
1. Unscrew the Knob
2. Insert the bare speaker cable end through the hole in the post
3. Tighten down the knob (finger tight only)
to secure the cable
Stereo Connection
This is an example of the stereo connection using the amplifier SA3
Please Note!!
Set the Amplifier Mode switch to Stereo Mode
Mono (Bridge) Connection
This is an example of the Mono (Bridge) connection with a pre-amplifier. Please note that when the PA3 is used
as a mono power amp, it will always amplify the left input signal and output to the connected speaker. The
connecting cable to the preamplifier must therefore always be connected to the left input socket (AMP IN) of
the PA3. The right input signal is ignored.
Please Note!!
Set the amplifier Mode switch to Mono (Bridge) position.
E
N