manualshive.com logo in svg

iOptron SmartEQ, Инструкция по эксплуатации, Страница: 36 / 44

Поделиться
Скачать
iOptron SmartEQ Скачать руководство пользователя страница 36

 
 

36

Appendix E. Polar Scope Adjustment 

 

If you are suspecting that the polar scope may be misaligned to the mount R.A. axis, you may check 

it by putting a star in the center of the polar scope reticle cross hairs and rotating mount’s R.A. axis. If the 
star stays in the center of cross hairs, the polar scope is aligned to the mount’s R.A. axis. 
 

In the event the polar scope optical axis needs to be adjusted, you can do this procedure at night 

while pointing at Polaris. However, it is probably easier to do it during the daytime using a distant point, 
such as a flag pole or top of a building a couple of hundreds away, as your target. Please remove the 
telescope, the counterweights and counterweight shaft from the mount. Aim the mount to the object. Use 
the Latitude Adjustment Screw and Azimuth Adjustment Knob to center the object. 
 

1.  Release RA Clutch Screws. Rotate the 

mount along the RA axis to the 
balance position, dovetail saddle on 

the 

right side. Lock the RA clutch screws.  

2. Loose latitude Locking Screws and 

Azimuth Locking Screws a little. 
Centering the object one the cross 
hairs by adjust Latitude Adjust. screw 

and 

Azi. Adjust. Knob. 

3.  Release the RA clutch again. Rotate 

the 

mount 180º to bring the dovetail to the 

left 

side. Retighten the RA clutch screw. 
Bring the object half the distance to the 
center by adjusting the reticle 
adjustment set screws using a hex key. 
Keep in mind that the image in the 
finder is inverted. Loose one screw first, 

then 

tighten the other screw(s). Only 
loose/tighten one screw at a time and a few turns each time to avoid the reticle totally lost its position. 
It may take a few minutes to familiarize yourself with the screws that move the polar scope in the 
appropriate direction. 

PLEASE do not over tighten the setting screws.

 

4.  Release the RA clutch and rotate the mount 180º to bring the dovetail back to the right side. If you 

are lucky enough, the object will stay in center of the polar scope. Otherwise, repeat Steps 2 and 3 
to further move the object to the center.  

5.  After few times, the object will stay in center when the mount is flipped from right to left. 
 

 

x

x

Rotate

Rotate

Center the object

Bring the object 
half the distance 
to the center

x x

x x

Rotate

Rotate

Center the object

Bring the object 
half the distance 
to the center

Eyepiece 

Reticle Adj. 
Screws 

Locking Ring

Objective Lens 

Содержание SmartEQ













































Отзывы:

Нет отзывов