8
© by IONTO-COMED
Set Upholstery Heating (optional)
1. Switch the upholstery heating on:
)
Press the ON key (15) to switch the upholstery heating on. The control panel
is located at the right side of the outer part of the back rest.
All blue LEDs (1-5) will light up.
)
Set the required temperature with the (+/–) keys of the control panel.
)
Press the (+) key (16) to increase the temperature.
The blue LEDs of the (1-5) keys will light up step by step.
)
Press the (–) key (17) to decrease the temperature.
The blue LEDs (1-5) will extinguish gradually.
Note
For safety reasons, the upholstery heating will automatically switch OFF
after 90 minutes of operation!
The upholstery heating can be switched ON again directly.
2. Switch the upholstery heating off:
)
Press the ON key (15) to switch the upholstery heating off.
3. Switch the treatment bed off:
)
Remove the mains power plug from the mains socket.
