© by IONTO-COMED
11
)
Press the (–) key (17) to decrease the temperature.
The blue LEDs (1-5) will extinguish gradually.
Note
For safety reasons, the upholstery heating will automatically switch OFF
after 90 minutes of operation!
The upholstery heating can be switched ON again directly.
2. Switch the upholstery heating off:
)
Press the ON key to switch the upholstery heating off.
3. Switch the treatment bed off:
)
Remove the mains power plug from the mains socket.
Cleaning and Care
Caution!
Danger of electric shock!
Disconnect from the mains power supply before cleaning.
Note
Do not use any solvents, chloride, polish, synthetic cleaning agents, wax
polish, aerosol sprays or aggressive cleaning agents which could cause
damage to the upholstery or the bed.
Do not use any substances which contain oil or grease to clean the
upholstery.
The upholstery is not resistant to chemical cleaning or dry-cleaning
methods.
)
Clean the upholstery with a cloth and warm water. We recommend microfiber
material (art. no. 8299.61) or a cleansing glove (art. no. 9168.9).
)
Dry upholstery after cleaning.
)
Remove any stains from the upholstery with a mild cleanser.
)
Remove obstinate stains with Incidin Foam (art. no. 4660). Carefully follow the
Directions for Use.
)
Clean the frame of the bed and the manual control with a lightly moistened cloth.
Ensure that no water enters the control unit or the manual control.
)
Wash the towelling cover at 60°C.
Repairs and Servicing
Your treatment bed does not require any special servicing when used correctly and in
compliance with the manufacturer’s directions and instructions. However, in the event
of any problem arising, please contact our customer service department.
Only persons authorised by the manufacturer may perform repairs. Any alterations or
repairs performed by non-authorised persons will invalidate any guarantee, warranty
or responsibility of the manufacturer. In addition, the safety of the treatment bed
could be adversely affected.
