Battery Installation
LITHIONICS BATTERY, CLEARWATER, FL 33765 USA | PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.com
Battery Module and NeverDie BMS Unit Environment and Mounting orientation
The Battery Module and BMS Unit should be mounted in an environment that does not receive direct sunlight, pressurized water
or road debris. To avoid power interruption, your installation may need to consider controlling the ambient operating
temperature. Mount the Battery Module in an upright position, i.e. black lid faces up. Other orientations are NOT permitted and
will void the warranty. The BMS Unit can be mounted in any orientation as long as all its features are accessible. Ensure that the
BMS Unit is located in close proximity to the Battery Module so that all connectors can be mated securely.
Temperature Sensor Connector
The temperature sensor cable and connector exiting the battery module must be connected to the BMS. Connect the two M8
circular connectors together by first aligning their pins and pressing them together, and then rotate the securing nuts until they
stop snugly. Do not use the temperature probe from the inverter-charger manufacturer.
17
