Battery Installation
LITHIONICS BATTERY, CLEARWATER, FL 33765 USA | PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.com
Main Power Connector
The battery module has a large black female main power connector that must be inserted into the BMS male main power connector.
This is the connector with the large 4/0 red and black wires and single small gauge gray cable. Align the connectors and insert them
together. Use 2 zip ties to bind the connectors together so that they may not separate during use.
NeverDie BMS Unit Power Terminals
Connect the BMS Unit Power Terminals to your DC bus, both Positive (Red) and negative (Black). Use correctly sized wire
conductors for the application. Torque to 80 INCH pounds. Never stack ring terminals or place the stainless-steel washer between
the Power Terminal and ring terminal lug.
Pressure Vent
It is recommended to install a ventilation hose onto the pressure vent barb when the Battery Module is in a location with poor
ventilation. The hose shall direct the gases to the atmosphere.
14
