ION IPA30B, Быстрый старт

Страница: 4 / 56

DIAGRAM AND PARTS DESCRIPTION
1. Master Volume Control: This adjusts the speak HU¶V main mix volume,
which includes the Auxiliary Input, Tuner, and the audio of a paired Bluetooth
device.
2.
Auxiliary input: This stereo ´ input can
be used to connect a CD player, MP3
player, or other audio source.
3. Bluetooth: The Paired LED will be lit
when a device is paired to JOB ROCKER.
This LED will not be lit when
JOB ROCKER is first powered on (unless it
was previously
paired with a device). Press
the Disconnect button to disconnect a paired
Bluetooth device.
4. AM/FM Presets: Store a favorite
radio station and quickly tune to a preset
radio station. There are 6 numeric
positions for AM stations and 6 numeric
positions for FM stations. To add a preset:
A. Select either the AM or FM band
and then use the Tuner buttons to
select the desired radio station.
2
5
7
B. Press and hold a numeric preset button to assign
the current station to that preset number. To use an
added preset, tap a preset number once lightly to go to
the stored radio station.
5. Radio Selector: This switch sets the tuner to AM or
FM or turns the tuner off.
( Note: This switch does not turn the unit's power off ± just the
tuner.)
6. LCD: Displays the current radio station.
7. Tuner: Use these buttons to search for a radio station. To
"scan" (jump to the next available station), hold this down for a
few seconds until it starts to seek a station. Unit will
remember the last station you were on and start at that
station when you power off and power on again.
8. Power LED: Indicates whether JOB ROCKER is on or off.
9. Antenna: Adjust this telescoping FM antenna to get the
best radio reception.
Note: To prevent accidental damage, we recommend
rotating the antenna only when it is extended horizontally.
Also, retract the antenna when the Tuner is not in use.
Note: When using AM radio if you have a Bluetooth
device that is paired, this will cause poor AM reception.
Unpair your
Bluetooth device in order to listen to AM radio.
10. Power Cable Input (IEC): Insert the included power
cable here to charge the unit. Note that the JOB
ROCKER can run off the power adapter while it
simultaneously charges the battery. The charge indicator
illuminates when the battery is charging.
11. Fuse Cover : If the u QLW¶V fuse is broken or if you
are changing the setting of the voltage selector
switch, use a screwdriver or other tool to lift this tab to replace the fuse. Replace it with a fuse with an appropriate
rating (printed under the u
QLW¶V power cable input, next to the desired voltage). Using a fuse with an incorrect
rating can damage the unit and/or fuse.
12. Power ON/OFF Switch: Turns JOB ROCKER on or off. Please note that while JOB ROCKER is connected to a power
source, it does not need to be powered on to charge the battery.
13. Battery Level Indicator: While the unit is powered ON and unit is not plugged in, these four lights indicate the power left
in the battery. Battery life varies based on volume and usage.
14. AC Outlet: 2 AC power outlets to provide AC power to other products.
iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
4