ION Game Day, Быстрый старт

Страница: 5 / 32

5
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Game Day and it will automatically go into pairing mode to search for Bluetooth devices. You
will know you are in pairing mode when the Bluetooth icon is off.
*
3. Navigate to your Bluetooth device’s setup screen, find “ Game Day ” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter “ 0000 ”.
4. The Bluetooth icon will be lit solid when a device is “paired” to Game Day. *
Note: Users should consider updating their OS if experiencing trouble with pairing or playing music.
5. Tap the Bluetooth button to disconnect a paired Bluetooth device. *
6. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
* Tip: If you would like to disable (or enable) the voice prompts, press and hold the Bluetooth button.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping
them together. Check in your device’s manual to see if this feature is supported.
To use NFC to pair with Game Day:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device’s Settings menu and check that NFC is turned On (one time step).
3. Power on Game Day.
4. Touch and briefly hold your device to the NFC logo.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “ 0000 ”.
6. To unpair, gently bump your device against the NFC logo located on Game Day’s top panel.
Using the Radio
Note: This section for use with North America/Japan models only.
Selecting a Radio Station:
1. Press the Radio button to choose FM/AM.
2. Select a radio station using the – / + buttons.
Note: If there is poor AM reception, disconnect AC power for optimal AM radio reception. To further adjust
AM reception, move the entire unit.
Saving a preset:
1. Press the Radio button to choose FM/AM and select a radio station that you want to save to a preset
location using the – / + buttons.
2. Press and hold Play/Pause for 3 seconds. A preset number will appear on the screen.
3. Use the – / + buttons to select which preset you want to save it to.
4. Press Play/Pause to confirm. SAVE will appear on the screen.
Selecting a preset:
Press Play/Pause to cycle through the saved presets.