ION Explorer Outback, Быстрый старт, Страница: 5 / 8

5
9.
Master Volume Control: This adjusts the speaker’s main mix volume, which includes the
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
10. Microphone Input with Volume Control (1/4”) : This mono input accepts a 1/4” (6.35 mm)
input such as a microphone, guitar, or other musical instrument.
11. Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
12. Speaker Link: Connect two or more Explorer Outbacks together using a 1/8” (3.5 mm)
stereo aux cable from the Speaker Link of one Explorer Outback to the Aux Input of the
second Explorer Outback. A 2’ (61 cm) cable is included but a longer one can be
purchased from a local electronics retailer.
13. USB Charging Ports: Connect your device’s charge cable here to charge it. USB charging
only functions when the unit’s power is turned on.
Note : To charge smartphones and tablets faster, put the device’s screen to sleep.
14. Power Cable Input (Back Panel) : Insert the included power cable here to charge the unit.
Note that the Explorer Outback can be used with the power cable while it simultaneously
charges the battery.
Pairing a Bluetooth Device
1.
Turn on your Bluetooth device.
2. Power on Explorer Outback. If you have previously connected to another Bluetooth device,
Explorer Outback will reconnect. To disconnect pairing if the Bluetooth icon is lit solid,
press and release the
Bluetooth button.
3. Navigate to your Bluetooth device’s setup screen, find “ Explorer Outback ” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter “ 0000 ”.
4. To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device’s manual to see if this feature is supported.
To use NFC to pair with Explorer Outback:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device’s Settings menu and check that NFC is turned On (one time step).
3. Power on Explorer Outback.
4. Touch and briefly hold your device to the NFC logo.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
“
0000 ”.
6. To unpair, gently bump your device against the NFC logo located on Explorer Outback’s
top panel.