ION Explorer Outback, Быстрый старт, Страница: 4 / 8

4
Features
Front Panel
1.
Power Button: Turns Explorer
Outback on or off. Please note
that while Explorer Outback is
connected to a power source, it
does not need to be powered on
to charge the battery. When the
power is on, the display will
show the power indicator.
2. Bluetooth Button : Press the
Bluetooth button to disconnect a paired Bluetooth device.
3. Light Mode Button: Press this button to select how the lights on the front panel function:
•
White: The lights are lit solidly white.
•
Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light
mode button to freeze the lights on one color.
•
Beat Sync: The lights react to the beat of the music.
•
Off: The lights turn off. This is the default mode when Explorer Outback is first powered
on.
4. Radio Selector: This button sets the Radio to AM, FM, or turns the radio off.
5. AM/FM Presets: Store a favorite radio station and quickly tune to a preset radio station.
There are 6 numeric positions to store AM band presets and 6 numeric positions to store
FM band presets.
To add a preset:
i. Select either the AM or FM band and then use the Tune/Track Buttons buttons to
select the desired radio station.
ii. Press and hold a numeric preset button to assign the current station to that preset
number. The display will show “
SAVE ” to show the station has been saved. To use an
added preset, tap a preset number once lightly to go to the stored radio station.
6. Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. To “seek” (jump to the next available
station), hold either button down for a few seconds until it starts to seek a station. The unit
will remember the last station it was on and start at that station when powered off and on
again.
7. Play/Pause: Press to play or pause a track from a connected Bluetooth device.
8. Display: Displays the current radio station, battery status, and Bluetooth status.
•
Charging Indicator: When the power cable is connected, movement of the top
battery segment shows the battery is charging. When fully charged, all battery
segments will be lit without blinking. When the power cable is disconnected, the
battery segment shows the level of the battery.
•
Lightning Bolt Icon: The lightning bolt icon will illuminate when the IEC power cable
is connected to wall power.
•
Bluetooth Icon: The Bluetooth icon will not be lit when Explorer Outback is first
powered on (unless it was previously paired with a device). The Bluetooth icon will be
lit solid when a device is paired to Explorer Outback.
•
Power Indicator: The power indicator will be lit when Explorer Outback is powered
on. The power indicator will not be lit when Explorer Outback is powered off.
1
2
5
3
4
6
7
8
9 10
11
12 10
13