Iomega REV 35gb, Руководство интегратора

Страница: 9 / 16

9
SC
SI
1
Install the REV System Software.
NOTE: See the “About the REV System Software” section of this guide for more
information.
2
Select an appropriate SCSI ID. The Iomega REV comes preset at SCSI ID 4.
You can use any SCSI ID that is not already in use by the computer or another device.
See the drive properties for information on the IDs of connected devices. ID 7 is
generally reserved for the SCSI adapter card.
Installing the Iomega REV Internal SCSI Drive