56K Internal PCI Modem
User’s Guide
Page 9
Hardware Installation
To install the 56K Internal PCI modem in your computer, follow these steps:
1
Turn off your computer, monitor, and other peripherals
You may also need to disconnect your power cord and other devices from the rear panel
of your computer.
Electronic components are sensitive to static electricity. To
prevent damage, discharge any static electricity from your body
by touching any known grounded metal surface, such as your
computer’s chassis, before and during installation of hardware.
2
Remove the computer cover
Locate and remove any screws that hold the cover in place. Gently remove the cover,
leaving the base of the unit in place. You may need to wiggle the cover back and forth
to loosen it. Do not use excessive force.
Your computer cover may be different that the computer cover
shown above. The screws may not be located at the back of
your computer. Some covers have screws on the side of the
computer. Tower cases also have different location for the
screws. Refer to your computer’s manual if you need specific
instructions on how to remove the cover.
