MANUAL
WASTESCALE WSS
FoodWasteTracker, measurement device and tablet
Ceruus Oy, ioLiving
Support:
3 (4)
smartkitchen.solutions
2.
Place the suitable waste container on top of the scale.
3.
Plug in the power supply of the Android tablet and switch it on.
4.
Connect the tablet to the Internet via either WiFi or a SIM card data connection.
5.
The accessory stand allows the tablet to be mounted on a tabletop or wall.
6.
Turn on the scale by plugging in the power supply. The green LED on the side of the scale lights up
when the device is ready for operation.
7.
Open the “WasteScale” app from the tablet de
sktop and sign in with your ioLiving credentials.
8.
Select the correct scale from the settings in the application menu (if there are other scales activated
in the account).
9.
If the scale does not show 0.000 kg, tare it from the application menu.
Using instructions
The WasteScale is intended to be used as follows:
•
The scale and tablet must be always connected to the mains.
•
If the app has shut down, select the "WasteScale" application from the tablet desktop to restart it.
•
If the Scale and tablet are turned off and the power supply is disconnected, the scale must be
restarted by plugging the power supply back into the electrical outlet.
•
Restart the tablet with its power button. The scale does not have a separate power switch.
Making a waste measurement with the WasteScale
1.
Place the waste item to be weighed in a container on the scale.
2.
The weight of the waste item and waste categories created previously in the service will appear on
the tablet screen.
3.
Select a correct waste category.
4.
Select a correct waste item.
5.
The measurement result is stored in the ioLiving cloud service. The
✓
symbol appears on the screen
when the measurement has been saved successfully.
6.
When the symbol disappears from the display, the scale is ready for the next waste measurement.
7.
Tare the scale if necessary. Note that automatic tare will occur within 30 seconds if no selections are
made.
8.
A warning appears on the display when the maximum load of the scale is being reached. Empty the
waste container.
Calibrating the ioLiving WasteScale
The WasteScale is calibrated if its measurement results are suspected to deviate significantly from the
correct value. Calibration is a procedure that should only be performed for a valid reason, not just for
certainty.
Deviation of the scale measurement results may occur if the measurement is made at a significantly higher
or lower temperature than the room temperature. The deviation may also occur over a longer period during
normal use. The using frequency of the scale is also notable. If the scale is used continuously, its deviation
may increase faster than the scale used occasionally. Dropping the scale or dropping the load on the scale
may also cause the need for calibration. Likewise, exposing the device to vibration.
