IOGear MiniView Ultra GCS138, Руководство по установке, Страница: 36 / 46

32
Function Keys
F6 Set:
When you press [F6] an OSD configuration submenu opens. To change a setting, move the highlight bar to the choice you
want, then press [Enter]. On the submenu that appears next, move the highlight bar to the choice you want and press [Enter].
An icon of a pointing finger indicates which choice is the currently selected one.
An explanation of the choices is given in the table (right):
Setti ng Functi on
Channel Display Durat ion Determines how long a Port ID is displayed for. There are two choices: 3 seconds - which displays the Port ID for 3
seconds after a port change has taken place; and Always On - which displays the Port ID at all times.
Channel Display Postit ion Allows you to position where the Port ID is shown on t he screen. After you highlight this item an press [Ent er] , the
menu disappears and the Port ID is displayed. Use the Arrow Keys, Pg Up, Pg Dn, Home, to posit ion t he Port ID
display, then press [Enter] to lock the position and return to the Set submenu.
Channel Display Mode Select how the Port ID is displayed. There are three choices: the Number plug the Name (PN + NA ME); the Number
alone (PN); or the Name alone (Name).
Scan Durat ion Determines how long the display pauses on each port when it cycles through the selected ports in Quick View Scan
Mode. The available opt ions are: 3, 5,10,15, 20,30, 40, and 60 seconds.
Clear t he Name List Clears all Port Names from the Name List. You are asked to confirm before the procedure goes on. Key in Y, then
press [ Enter] to confirm. While the names are being cleared, a message appears on the display to indicate so. After
the names have been cleared, another message appears to indicate that the procedure completed successfully.