IOGear MiniView SE GCS82A, Руководство по установке

Страница: 22 / 28

18
Symptoms Cause Action
Video Problems Resolution and/or Bandwidth set too high The MiniView™ SE GCS82A/84A supports VGA, SVGA,
Multisync, and XGA (interlaced), with resolutions of up
to 1920 x 1440. The maximum banwidth is 150 Mhz.
Cable quality not good enough
We strongly recommend that you use the high quality
IOGEAR cables provided with the GCS82A and
GCS84A package. Using our high quality cables should
eliminate possible video problems.
Troubleshooting Cont.
1. The MiniView™ SE GCS82A/84A is designed to work with AT and PS/2 keybaords. Older XT (84 key) and some older AT keybaords (those with the
function keys on the side), will not work.
2. Some Notebook computers, noteably the IBM Thinkpad and Toshiba Tecra have trouble working with the MiniView™ SE GCS82A/84A when their mouse
and keyboard ports are used simultaneously. To avoid this problem, only connect the mouse port or the keyboard port to the MiniView™ SE unit. If you
connect the mouse port, you will need to use the notebook’s keyboard when the notebook is the active computer.
If you need further assistance please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/support for the latest tips, tricks, and troubleshoot-
ing. The IOGEAR T.I.L. was designed to provide you with the latest technical information about our products. Most of the answers to your questions can be
found here, so please try it out before contacting technical support.
Technical Support is available Monday through Friday from 8:00am to 5:00pm PST and can be reached at 949-428-1111.
Appendix