IOGear MiniView SE GCS82A, Руководство по установке

Страница: 18 / 28

Last/Next Mode (GCS84A only)
This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular post for
as long or as little as you like as opposed to Auto Scan Mode, which switches after a fixed interval. To invoke Last/Next Mode
Key in the following HotKey combination.
1. Press and release [Alt+Ctrl+Shift]
2. Press and release [9]
3. Press Enter [Enter]
Once Last/Next Modes is active pressing the left Shift key (LShift) switches to the previous computer from the currently active
one) pressing (RShift) switches to the next computer in the installation.
Note: 1. There is another, shorter HotKey combination to produce Last/Next Mode switching. Simply press the left control twic
in succession LCtrl + LCtrl to the previous computer or press the Right Ctrl key twice in succession RCtrl + RCtrl to
swich to the next computer. This method is available all the time. It does not have to be invoked first as in the case
of the Alt+Ctrl+Shift method.
2. While Last/Next Mode is in effect none of the other keyboard keys will function. You must exit Last/Next Mode by pressing the spacebar in order
to use the console for anything else. GCS84A does not support serial mice.
14
Operation