Connect the power adapter to the power supply and the other end to the USB 2.0 port
Step. 1
5. Pictorial Introduction
6. Hardware Installation of the 7-Port USB 2.0 Hub
1. USB 2.0 Ports (7 downstream ports)
2. USB 2.0 (1 upstream port)
3. Power port
4. The IOGEAR Logo, a mark of quality
Note: Before you begin, please make sure that your computer has been turned off.
Step. 2
• Plug the Hi-Speed USB 2.0 Cable (Type B connector) into the USB 2.0 upstream port
• Plug the Hi-Speed USB 2.0 Cable (Type A connector) into your computer’s USB 2.0 or USB 1.1 port.
Step. 3
Turn on your computer
Step. 4
Once your computer has finished booting up, a series of messages will let you know that the USB 2.0 Hub
has been recognized and the Hub is successfully installed.
Note: If you are using non-high-speed USB 1.1 port a series of warning will prompt to remind you that a non-
high speed port has been detected. In that case just close the warnings windows and continue.
1.
3.
2.
4.
