IOGear GCS1782G, Руководство по установке

Страница: 32 / 44

32
Starting the Upgrade
1. Run the downloaded Firmware Upgrade Package file – either by double clicking the file icon, or
using a command line to enter the full path. The Firmware Upgrade Utility Welcome
screen appears:
2. Read the License Agreement (click the I Agree button).
3. Click Next. The Firmware Upgrade Utility main screen appears. The Utility inspects your
installation. All the devices capable of being upgraded by the package are listed in the Device
List panel.
4. As you select a device in the list, its description appears in the Device Description panel. After
you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check
Firmware Version, the Utility compares the device’s firmware level with that of the upgrade files.
If the device’s version is higher than the upgrade version, a dialog box gives you the option to
Continue or Cancel.
If you didn’t enable Check Firmware Version, the Utility installs the upgrade files without checking
whether they are a higher level, or not.