4
Open/Close Console
Opening the Console
The GCL1908 / GCL1916's console is located under the top cover. To access the console,
slide the console module out and raise the cover.
Note:
As a safety precaution, to keep the console from accidentally sliding out, the console is
locked into the In position. Before you can pull the console module out, you must release it by
pushing the catches on the unit's front panel toward the center of the switch.
To slide the console module out, do the following:
1. Push the catches inward
2. Slide the module all the way out.
3. Open the cover.
Closing the Console
To slide the console module back in, do the following:
1. Close the cover.
2. Push the module all the way in until it automatically
locks in place.
